Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2009 >> Raider 4D Pickup, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules) >> Module - Front Control >> Installation

Module - Front Control: Installation

WARNING: This page is about a different car, the 2007 Mitsubishi Raider. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Control Module (FCM), Four Fasteners And Power Distribution Center (PDC)
G04853424Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  1. Connect the Power Distribution Center (PDC) (3) to the Front Control Module (FCM) by lining up the electrical connector and pushing the two together.
  2. Install the four fasteners (2) securing the FCM (1) to the PDC (3).
  3. Install the Integrated Power Module (IPM).
  4. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals