Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2009 >> Outlander ES, AWD >> Repair and Diagnosis >> Maintenance >> Procedures >> General >> Maintenance Service >> Transfer Oil (Check Oil Level And Condition/Change) >> Check Oil Level And Condition

Check Oil Level And Condition

  1. Remove the oil filler plug.
  2. Check that the oil level is just below the lower edge of the oil filler plug hole.
  3. Check that the oil is not excessively foul and has moderate viscosity.
  4. Install the oil filler plug and tighten to the specified torque.

    Tightening torque: 32 ± 2 N.m (23 ± 2 ft-lb) 

Fig 1: Identifying Filler Plug Hole And Filler Plug
G05425581Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals