Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2009 >> Lancer ES, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Braking System (Abs) >> Abs Diagnosis >> Symptom Procedures >> Inspection Procedure 1: Scan Tool cannot Communicate only with ABS-ECU >> Notes

Inspection Procedure 1: Scan Tool cannot Communicate only with ABS-ECU: Notes

CAUTION:
  • If there is any problem in the CAN bus lines, an incorrect DTC may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to CAN BUS LINE DIAGNOSTIC FLOW ).
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.
  • If the power is supplied with the earth circuit of CAN communication device open circuited, an electric potential abnormality may occur to the CAN bus lines.
scientia non olet · About Mike's Workshop Manuals