Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2008 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Local Interconnect Network (Lin) - Lancer Evolution) >> Special Tools

Special Tools

WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOLS CHART

Tool Number Name Use
G05397283Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991955
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991825
  6. MB991826
M.U.T.-III sub-assembly
  1. Vehicle Communication Interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III measure adapter
  6. M.U.T.-III trigger harness
CAUTION: For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
LIN communication line check (service data and diagnosis codes)