Service Specification
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATION
| ITEM | STANDARD VALUE | LIMIT |
|---|---|---|
| Manifold distortion of the installation surface mm (in) | 0.15 (0.006) or less | 0.20 (0.008) |
| Intake charge pressure kPa (psi) | 85 - 159 (12.4 - 23.0) | - |
| Turbocharger waste gate actuator pressure kPa (psi) | 98 - 102 (14.3 - 14.7) | - |
| No. 1 Turbocharger waste gate solenoid terminal resistance [at 20°C (68°F) ] Ω | 29 - 35 | - |
| No. 2 Turbocharger waste gate solenoid terminal resistance [at 20°C (68°F) ] Ω | 29 - 35 | - |
| Exhaust manifold distortion of the installation surface mm (in) | - | 0.70 (0.028) |