Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2007 >> Outlander LS, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Wireless Control Module (WCM) >> On-Vehicle Service >> Id Codes Registration Procedure >> Key Registration (Barcode No.) Method

Key Registration (Barcode No.) Method

Fig 1: M.U.T.-III Display - OK Button
G04872621Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  1. When "Key Registration (Barcode No.)" screen is displayed, enter the password for the key registration and press the OK button.
    NOTE: If the wrong password is entered consecutively 5 times, the password entry for the key registration will be disabled for 16 minutes.
    Fig 2: M.U.T.-III Display - Word Of Registration
    G04872622Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 3: M.U.T.-III Display - Barcode
    G04872538Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Follow the message on the screen to enter the bar code No., and then press the OK button.
  3. When "Do you want to start registration?" is displayed, press the OK button to start the registration, or press the Cancel button to cancel the registration.
  4. "Key Registration was completed" is displayed. Press the OK button to finish the registration.
scientia non olet · About Mike's Workshop Manuals