Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2006 >> Outlander LS, AWD, Standard >> Repair and Diagnosis >> Maintenance >> Procedures >> General >> Maintenance Service >> 12. Manual Transaxle Oil >> Checking Transaxle Oil Level

Checking Transaxle Oil Level

  1. Remove the filler plug.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty.
  4. Tighten the filler plug to the specified torque.

    Tightening torque: 32 +/- 2 N. m (24 +/- 1 ft-lb) 

Fig 1: Checking Transaxle Oil Level
G04299826Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals