Stoplight Switch
- Disconnect the connector.
- Check for continuity between the terminals of the switch.
TERMINAL CONNECTOR OF TESTER SPECIFIED CONDITION
| MEASUREMENT CONDITION | TERMINAL CONNECTOR OF TESTER | SPECIFIED CONDITION |
|---|---|---|
| When brake pedal is depressed. | 1 -2 (for stoplight circuit) | Less than 2 ohms |
| 3 -4 (for auto-cruise control circuit) | Open circuit | |
| When brake pedal is not depressed. | 1 -2 (for stoplight circuit) | Open circuit |
| 3 -4 (for auto-cruise control circuit) | Less than 2 ohms |