Section 5 (On-Vehicle Service (2.4L)): General Description
WARNING: This page is about a different variant/trim than selected.
The 4G69 (2.4L) engine is an in-line four cylinder engine. The cylinder numbers are assigned as 1 - 2 - 3 - 4 from the front of the engine (timing belt side). This engine is fired in the order of the 1, 3, 4 and 2 cylinders.
ITEM SPECIFICATION
| ITEM | SPECIFICATION | ||
|---|---|---|---|
| Type | In-line SOHC | ||
| Number of cylinders | 4 | ||
| Bore mm (in) | 87 (3.43) | ||
| Stroke mm (in) | 100.0 (3.94) | ||
| Total displacement cm3 (cu in) | 2,378 (145.1) | ||
| Compression ratio | 9.5 | ||
| Firing order | 1 - 3 - 4 - 2 | ||
| Counterbalance shaft | Equipped | ||
| Valve timing | Intake valve | Opens (BTDC) | 6° < Low speed cam > |
| 20° < High speed cam > | |||
| Closes (ABDC) | 38° < Low speed cam > | ||
| 72° < High speed cam > | |||
| Exhaust valve | Opens (BBDC) | 60° | |
| Closes (ATDC) | 16° | ||
| Lubrication system | Pressure feed, full-flow filtration | ||
| Oil pump type | Involute gear type | ||