Service Specifications
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | |
|---|---|---|---|
| Power steering oil pump and A/C compressor drive belt tension (When checked) | Vibration frequency Hz | 115 - 142 | - |
| Tension N (lb) | 392 - 588 (88 - 132) | - | |
| Deflection mm (in) (Reference) | 11.3 - 14.9 (0.44 - 0.59) | - | |
| Power steering oil pump and A/C compressor drive belt tension (When adjusted) | Vibration frequency Hz | 123 - 135 | - |
| Tension N (lb) | 441 - 539 (99 - 121) | - | |
| Deflection mm (in) (Reference) | 12.0 - 13.9 (0.47 - 0.55) | - | |
| Power steering oil pump and A/C compressor drive belt tension (When replaced) | Vibration frequency Hz | 147 - 169 | - |
| Tension N (lb) | 637 - 833 (143 - 187) | - | |
| Deflection mm (in) (Reference) | 8.5 - 10.8 (0.33 - 0.43) | - | |
| Actual ignition timing at idle | Approximately 5° BTDC | - | |
| Basic ignition timing at idle | 5° BTDC +/- 3° | - | |
| CO content % | 0.5 or less | - | |
| Compression pressure (200 r/min) kPa (psi) | 1,618 (234) | Minimum 1,176 (170) | |
| Compression pressure difference of all cylinder kPa (psi) | - | 98 (14) | |
| Curb idle speed r/min | 700 +/- 100 | - | |
| Cylinder head bolt shank length mm (in) | - | 99.4 (3.91) | |
| HC contents ppm | 100 or less | - | |
| Intake manifold vacuum at curb idle kPa (in Hg) | - | Minimum 60 (18) | |