< Scan Tool Or Voltmeter >
WARNING: This page is about a different variant/trim than selected.
If a problem is found in the Pulse Check, observe the table below.
INPUT SIGNAL CHART < SCAN TOOL OR VOLTMETER >
| SYMPTOM | INSPECTION PROCEDURE | |
|---|---|---|
| ETACS-ECU does not receive any signal from the key reminder switch. | N-1 | |
| ETACS-ECU does not receive any signal from the hazard warning light switch. | N-2 | |
| ETACS-ECU does not receive any signal from the seat belt buckle switch (driver's side). | N-3 | |
| ETACS-ECU does not receive any signal from all the door switches. | N-4 | |
| ETACS-ECU does not receive any signal from the driver's door lock key cylinder switch. | N-5 | |
| ETACS-ECU does not receive any signal from the driver's door lock actuator switch. | N-6 | |
| ETACS-ECU does not receive any signal from the door lock switch (incorporated in the power window main switch). | N-7 | |
| ETACS-ECU does not receive any signal from the vehicle speed sensor. < M/T > | N-8 | |
| ETACS-ECU does not receive vehicle speed signal. < A/T > | ||
| Transmitter | ETACS-ECU does not receive any signal from the lock or unlock switch. | N-9 |
| ETACS-ECU does not receive any interior light loaded signal. | N-10 | |