Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Lower arm assembly | |
| Lower arm to crossmember connection bolt (Rear) | 167 +/-9 N.m (123 +/-7 ft-lb) |
| Lower arm to crossmember connection bolt (Front) | 186 +/-10 N.m (137 +/-7 ft-lb) |
| Lower arm to knuckle connection nut | 108 +/-10 N.m (80 +/-7 ft-lb) |
| Stabilizer bar | |
| Crossmember connection bolt | 167 +/-9 N.m (123 +/-7 ft-lb) |
| Crossmember bolt | 49 +/-10 N.m (37 +/-7 ft-lb) |
| Crossmember nut | 167 +/-9 N.m (123 +/-7 ft-lb) |
| Rear roll stopper connection nut | 52 +/-7 N.m (39 +/-5 ft-lb) |
| Stabilizer fixture bolt | 21 +/-4 N.m (16 +/-3 ft-lb) |
| Steering gear and joint connecting bolt | 18 +/-2 N.m (13 +/-2 ft-lb) |
| Lower arm to knuckle connection nut | 108 +/-1 10 N.m (80 +/-7 ft-lb) |
| Tie rod end to knuckle connection nut | 25 +/-5 N.m (19 +/-3 ft-lb) |
| Strut assembly | |
| Strut assembly jam nut | 60 +/-10 N.m (45 +/-7 ft-lb) |
| Strut assembly to body connection nut | 44 +/-5 N.m (33 +/-3 ft-lb) |
| Strut assembly to knuckle connection nut | 167 +/-9 N.m (123 +/-7 ft-lb) |