Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Air bag module(s) and clock spring | |
| Clock spring screw | 0.69 +/- 0.15 N. m(6 +/- 1 in-lb) |
| Steering wheel nut | 41 +/- 8N. m(30 +/- 6 ft-lb) |
| Torx screw | 9.0 +/- 2.0 N. m (80 +/- 17 in-lb) |
| Front impact sensor | |
| Front impact sensor nut | 5.0 +/- 1.0 N. m (44 +/- 9 in-lb) |
| Seat belts with pre-tensioner | |
| Seat belt lower anchor bolt | 44 +/- 10 N. m (33 +/- 7 ft-lb) |
| Seat belt shoulder anchor bolt | 44 +/- 10 N. m (33 +/- 7 ft-lb) |
| Seat belt with pre-tensioner mounting bolt | 44 +/- 10 N. m (33 +/- 7 ft-lb) |
| Seat slide sensor | |
| Seat slide sensor mounting bolt | 5.0 +/- 1.0 N. m (44 +/- 9 in-lb) |
| Side impact sensor | |
| Side impact sensor nut | 5.0 +/- 1.0 N. m (44 +/- 9 in-lb) |
| SRS control unit (SRS-ECU) | |
| SRS-ECU bracket bolt | 5.0 +/- 1.0 N. m (44 +/- 9 in-lb) |
| SRS-ECU mounting nut | 5.0 +/- 1.0 N. m (44 +/- 9 in-lb) |