Special Tools
WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOLS CHART
| TOOL | TOOL NUMBER AND NAME | SUPERSESSION | APPLICATION |
|---|---|---|---|
| MB990784 Ornament remover |
General service tool | Removal of cover. | |
| MB990803 Steering wheel puller |
General service tool | Steering wheel removal | |
| A B C D E F G |
MB991958 A: MB991824 B: MB991827 C: MB991910 D: MB991911 E: MB991914 F: MB991825 G: MB9918260 MUT-III sub assembly A: Vehicle communication interface (V.C.I.) B: MUT-III USB cable C: MUT-III main harness A (Vehicles with CAN communication system) D: MUT-III main harness B (Vehicles without CAN communication system) E: MUT-III main harness C (for Daimler Chrysler models only F: MUT-III measurement adapter G: MUT-III trigger harness |
MB991824-KIT
NOTE:
G: MB991826 MUT-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
|
SWS communication line check (ECU check and service data)
CAUTION:
MUT-III main harness B (MB991911) should be used. MUT-III main harness A and C should not be used for this vehicle.
|
| MB991865 Dummy resistor |
SRS air bag circuit check | ||
| MB991866 Resistor harness |
|||
| MB991884 Resistor harness |
Resistor harness (for pre-tensioner) | Seat belt with pre-tensioner circuit check | |
| MB991885 Adapter harness |
Pre-tensioner adapter harness |
|
|
| A B C D |
MB991223 A: MB991219 B: MB991220 C: MB991221 D: MB991222 Harness set A: Test harness B: LED harness C: LED harness adaptor D: Probe |
General service tools | Checking the continuity and measuring the voltage at the SRS-ECU harness connector |
| MB992006 Extra fine probe |
General service tool | Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector. | |
| MB686560 SRS air bag adapter harness | General service tool |
|