SRS Control Unit (SRS-Ecu): Inspection
WARNING: This page is about a different variant/trim than selected.
WARNING:
If a dent, crack, deformation or rust is discovered, replace the SRS-ECU with a new one.
- Check the SRS-ECU and brackets for dents, cracks or deformation.
- Check the SRS-ECU connector for damage, and the terminals for deformation.
NOTE:
refer to
DTC B1556: SEAT SLIDE SENSOR SYSTEM FOR FAULT 2 (MALFUNCTION OF SEAT SLIDE SENSOR) for inspection of SRS-ECU for other than physical damage.