Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2006 >> Lancer Evolution >> Repair and Diagnosis >> Electrical >> Starter >> Starting System - Lancer Evolution >> Starter Motor Assembly >> Inspection (Disassembly And Assembly) >> Brushes

Inspection (Disassembly And Assembly): Brushes

  1. Check the commutator contacting surface of each brush for abnormal roughness. Also check the height of the brush. Replace the brush holder if the height is lower than the limit.

    Limit: 7.0 mm 

  2. When the contact surface of the brush is rectified or the brush holder is replaced, recondition the contact surface with sandpaper wrapped around the commutator.
    Fig 1: Checking Height Of Brush
    G04296119Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals