Spark Plug Check And Cleaning
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Do not attempt to adjust the gap of the iridium plug.
- Cleaning of the iridium plug may result in damage to the iridium and platinum tips. Therefore, if carbon deposits must be removed, use a plug cleaner and complete cleaning within 20 seconds to protect the electrode. Do not use a wire brush.
Check the plug gap and replace if the limit is exceeded.
Standard value: 0.5 - 0.6 mm (0.020 - 0.024 inch)
Limit: 0.75 mm (0.0295 inch)