Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2006 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Ignition System - Lancer Evolution) >> On-Vehicle Service >> Spark Plug Cable Resistance Check

Spark Plug Cable Resistance Check

WARNING: This page is about a different variant/trim than selected.

Measure the resistance of the all spark plug leads.

  1. Check the cap and coating for cracks.
  2. Measure the resistance.

    Limit: 19 kΩ 

  3. If resistance is greater than 19 kΩ, replace the cable.
    Fig 1: Measuring Resistance Of All Spark Plug Leads
    G04296130Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals