MULTIPORT Fuel Injection (2.4L) - Eclipse - General Descriptions, Introduction, DTC And Symptom Charts

• General Description
  • Notes
  • Fuel Injection Control
  • Throttle Valve Opening Control
  • Idle Air Control
  • Ignition Timing Control
  • Diagnostic Test Mode
  • Other Control Functions
    • Fuel Pump Control
    • A/C Compressor Clutch Relay Control
    • Engine Oil Control Valve Control
    • Fan Relay Control
    • Generator Output Current Control
    • Evaporative Emission Purge Control
    • EGR Control
  • MULTIPORT Fuel Injection (MFI) System Diagram
• MULTIPORT Fuel Injection (MFI)
  • Troubleshooting Strategy
  • Diagnostic Function
    • Notes
    • Malfunction Indicator Lamp (Service Engine Soon Or Check Engine Lamp)
      • Notes
      • How To Connect The Scan Tool (Mut-III)
      • How To Read And Erase Diagnostic Trouble Codes.
      • How To Read Data List
      • How To Perform Actuator Test
      • How To Diagnose The Can Bus Lines
      • PROVISIONAL Diagnostic Trouble Codes [OBD-II Test Mode - Results (Mode 7)]
      • Mode 6 Reference Table
      • Diagnostic By Diagnostic Test Mode II (Increased Sensitivity)
      • On-Board Diagnostics
      • OBD-II Drive Cycle
        • Notes
        • Drive Cycle Pattern List
        • Pattern 1
        • Pattern 2
        • Pattern 3
        • Pattern 4
        • Pattern 5
        • Pattern 6
        • Pattern 7
        • Pattern 8
        • Pattern 9
        • Pattern 10
        • Pattern 11
        • Pattern 12
        • Pattern 13
        • Pattern 14
        • Pattern 15
        • Pattern 16
        • Pattern 17
        • Pattern 18
        • Pattern 19
        • Pattern 20
        • Pattern 21
        • Pattern 22
    • System Readiness Test Status
      • Purpose
      • Overview
      • Fail-Safe Function Reference Table
      • Diagnostic Trouble Code Chart
  • Symptom Chart
    • Notes
    • Problem Symptoms Table (For Your Information)