Diagnostic Trouble Code Chart
WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
During diagnosis, a DTC associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
Follow the inspection chart that is appropriate for the diagnostic trouble code.
NOTE:
Since the TCL is controlled with the same ABS/TCL-ECU < FWD > or TCL/ASC-ECU < AWD > used to control the ABS, the codes (with a *) used only for the ABS also appear.
For DTCs which are not located in this article, refer to DIAGNOSTIC TROUBLE CODE CHART .
DIAGNOSTIC TROUBLE CODES
| DTC | Definition |
|---|---|
| C1396 | Engine Torque Intervention Refusal |
| C1397 | Transmission Range Switch Input Refusal |
| U1100 | CAN Communications System Time Out Error Engine Related Data |
| U1101 | CAN Communications System Time Out Error A/T Related Data |
| U1120 | CAN Communications System TCL Uncontrollable by Engine Malfunction |
| U1400 | Dynamic range error APS1 |