Service Specifications
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT |
|---|---|---|
| Actual ignition timing at idle | Approximately 5° BTDC | - |
| Basic ignition timing at idle | 5° BTDC +/- 3° | - |
| CO content % | 0.5 or less | - |
| Compression pressure (200 r/min) kPa (psi) | 1,618(234) | Minimum 1,176 (170) |
| Compression pressure difference of all cylinder kPa (psi) | - | 98 (14) |
| Curb idle speed r/min | 700 +/- 100 | - |
| Cylinder head bolt shank length mm (in) | - | 99.4(3.91) |
| HC contents ppm | 100 or less | - |
| Intake manifold vacuum at curb idle kPa (in Hg) | - | Minimum 60 (18) |