Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION | |
|---|---|---|
| Accelerator cable clamp attaching bolt | 10 ± 2 N.m (89 ± 17 in-lb) | |
| Accelerator cable plate attaching bolt | 5.0 ± 1.0 N.m (44 ± 9 in-lb) | |
| Baffle plate attaching bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Camshaft position sensor sensing cylinder attaching bolt | 22 ± 4 N.m (16 ± 3 ft-lb) | |
| Camshaft position sensor support attaching bolt | 14 ± 1 N.m (120 ± 13 in-lb) | |
| Camshaft sprocket attaching bolt | 88 ± 10 N.m (65 ± 7 ft-lb) | |
| Crankshaft pulley attaching bolt | 182 ± 4 N.m (134 ± 3 ft-lb) | |
| Cylinder head attaching bolt | 74 ± 4 N.m → 0 N.m → 20 ± 2 N.m → +90° → +90° (55 ± 3 ft-lb → 0 in-lb → 15 ± 1 ft-lb → +90° → +90°) | |
| Drive plate attaching bolt <A/T> | 98 ± 5 N.m (73 ± 3 ft-lb) | |
| Engine mount insulator to frame bolt | 44 ± 10 N.m (33 ± 7 ft-lb) | |
| Engine mount bracket to engine nut | 67 ± 7 N.m (50 ± 5 ft-lb) | |
| Engine support bracket attaching nut | 49 ± 5 N.m (36 ± 4 ft-lb) | |
| Fuel high-pressure hose attaching bolt | 5.0 ± 1.0 N.m (44 ± 9 in-lb) | |
| Flywheel attaching bolt <M/T> | 98 ± 5 N.m (73 ± 3 ft-lb) | |
| Generator adjusting brace attaching bolt | 23 ± 2 N.m (17 ± 1 ft-lb) | |
| Ground wire attaching bolt | 10 ± 2 N.m (89 ± 17 in-lb) | |
| Intake manifold stay attaching bolt | 31 ± 3 N.m (23 ± 2 ft-lb) | |
| Lower oil pan attaching bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Oil pan cover attaching bolt | 7.0 ± 1.0 N.m (62 ± 9 in-lb) | |
| Oil pan drain plug | 39 ± 5 N.m (29 ± 3 ft-lb) | |
| Power steering oil pump attaching bolt | 22 ± 4 N.m (16 ± 3 ft-lb) | |
| Power steering oil pump bracket stay attaching bolt | 49 ± 9 N.m (37 ± 7 ft-lb) | |
| Power steering oil line bracket bolt | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Pressure hose attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Pressure tube attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Rocker arm and shaft assembly attaching bolt | 31 ± 3 N.m (23 ± 2 ft-lb) | |
| Rocker cover attaching bolt | 3.4 ± 0.5 N.m (31 ± 4 in-lb) | |
| Timing belt tensioner attaching bolt | 23 ± 3 N.m (17 ± 2 ft-lb) | |
| Timing belt lower cover attaching bolt | 10 ± 2 N.m (89 ± 17 in-lb) | |
| Timing belt front upper cover attaching bolt | 10 ± 2 N.m (89 ± 17 in-lb) | |
| Upper oil pan attaching bolt | M6 x 10 | 7.0 ± 1.0 N.m (62 ± 9 in-lb) |
| M6 x 18, M6 x 22 | 9.0 ± 3.0 N.m (79 ± 26 in-lb) | |
| M8 x 40 | 24 ± 3 N.m (18 ± 2 ft-lb) | |
| M10 x 40 | 49 ± 6 N.m (37 ± 4 ft-lb) | |
| M6 x 50, M6 x 127 | 9.0 ± 3.0 N.m (79 ± 26 in-lb) | |