Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2005 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (General -- Except Evolution) >> Towing And Hoisting >> Axle Stands And A Single-Post Lift Or Double-Post Lift >> Notes

Axle Stands And A Single-Post Lift Or Double-Post Lift: Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • If rubber attachments with grooves that are too thick are used at the front support positions, the front fender may become bent, so be sure to use rubber attachments with groove thicknesses of 18 mm (0.71 inch) or less.
  • If attachments which are not high enough are used, they may damage areas such as the side step. Be sure to use attachments which are high enough, or remove the side step if not using attachments.
scientia non olet · About Mike's Workshop Manuals