Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2005 >> Lancer ES, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System -- Except Evolution >> On-Vehicle Service >> Spark Plug Cable Resistance Check >> < 2.0L Engine >

< 2.0L Engine >

Measure the resistance of the all spark plug leads.

  1. Check the cap and coating for cracks.
  2. Measure the resistance.

    Limit: 19 kΩ 

  3. If resistance is greater than 19 kΩ, replace the cable.
    Fig 1: Measuring Resistance Of Spark Plug Leads
    G02464001Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals