Service Specifications
BRAKE SYSTEM SERVICE SPECIFICATIONS
| Application |
Specification |
| Brake Booster |
| Effective Diameter Of Power Cylinder |
8 + 9" (205 + 230 mm) |
| Boosting Ratio |
6.0 |
| Booster Push Rod Protruding Length |
.400-.409" (10.15-10.40 mm) |
| Brake Pedal Height |
5.9-6.0" (150-153 mm) |
| Brake Pedal Free Play |
.12-.31" (3-8 mm) |
| Brake Pedal-To-Floor Clearance (Minimum) |
3.9" (100 mm) |
| Front Disc Brake |
| Brake Pad Thickness |
| Standard |
.39" (10.0 mm) |
| Minimum |
.08" (2.0 mm) |
| Caliper Inside Diameter |
2.37" (60.3 mm) |
| Disc Effective Diameter |
8.7" (222 mm) |
| Disc Thickness |
| Standard |
1.02" (26.0 mm) |
| Minimum |
.96" (24.4 mm) |
| Disc Runout (Max.) |
.0015" (.04 mm) |
| Drag Force (Max.) |
15 Lbs. (6.8 kg.) |
| Front Hub End Play |
.002" (.05 mm) |
| Master Cylinder Inside Diameter |
.87" (22.2 mm) |
| Proportioning Valve Output Fluid Pressure |
| Split Point |
533-604 psi (3680-4170 kPa) |
| When Input Fluid Pressure Is 1422 psi (9805 kPa) |
676-747 psi (4660-5150 kPa) |
| Proportioning Valve Output Fluid Pressure Maximum Difference Between Left & Right |
73 psi (503 kPa) |
| Rear Drum Brake |
| Drum Diameter |
| Standard |
9.00" (228.6 mm) |
| Maximum |
9.08" (230.6 mm) |
| Lining Thickness |
| Standard |
.19" (4.9 mm) |
| Minimum |
.04" (1.0 mm) |
| Wheel Cylinder ID |
.81" (20.6 mm) |