Inspection Procedure 2: Throttle Valve Will Not Fully Open Or Close < 2.4L Engine >: Diagnosis
- STEP 1. Check the accelerator cable adjustment.
Q: Is the accelerator cable properly adjusted?
- YES : Go to Step 2.
- NO : Adjust the accelerator cable by referring to ACCELERATOR CABLE CHECK AND ADJUSTMENT and then go to Step 3 .
- STEP 2. Check the accelerator pedal position sensor assembly.
Check that the lever of the accelerator pedal position sensor assembly moves smoothly by moving it by hand.
Q: Does the lever of the accelerator pedal position sensor assembly move smoothly?
- YES : Go to Step 3.
- NO : Replace the accelerator pedal position sensor assembly (Refer to ACCELERATOR PEDAL POSITION SENSOR <2.4L ENGINE> ), then go to Step 3.
- STEP 3. Retest the system.
Q: Does the throttle valve fully open and close?
- YES : The procedure is complete.
- NO : Return to Step 1 .