Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 58 (Simplified Wiring System (SWS) - Lancer SPORTBACK) >> SWS Diagnosis >> Symptom Chart >> < Function System>

< Function System>

WARNING: This page is about a different variant/trim than selected.
FUNCTION SYSTEM CHART

SYSTEM SYMPTOM INSPECTION PROCEDURE REFERENCE
Tone alarm General description concerning the tone alarm function - GENERAL DESCRIPTION CONCERNING THE TONE ALARM 
Ignition key reminder tone alarm function does not work normally B-1 INSPECTION PROCEDURE B-1: TONE ALARM: IGNITION KEY REMINDER TONE ALARM FUNCTION DOES NOT WORK NORMALLY 
Light reminder tone alarm function does not work normally B-2 INSPECTION PROCEDURE B-2: TONE ALARM: LIGHT REMINDER TONE ALARM FUNCTION DOES NOT WORK NORMALLY. 
Seat belt tone alarm function does not work normally B-3 INSPECTION PROCEDURE B-3: TONE ALARM: SEAT BELT TONE ALARM FUNCTION DOES NOT WORK NORMALLY. 
Central door locking system General description concerning the central system door locking system - GENERAL DESCRIPTION CONCERNING THE CENTRAL DOOR LOCKING SYSTEM 
The central door lock system does not work at all C-1 INSPECTION PROCEDURE C-1: CENTRAL DOOR LOCKING SYSTEM: THE CENTRAL DOOR LOCK SYSTEM DOES NOT WORK AT ALL. 
Some doors do not lock or unlock C-2 INSPECTION PROCEDURE C-2: CENTRAL DOOR LOCKING SYSTEM: SOME DOORS DO NOT LOCK OR UNLOCK. 
All the doors do not lock or unlock with just the door lock switch operation C-3 INSPECTION PROCEDURE C-3: CENTRAL DOOR LOCKING SYSTEM: ALL THE DOORS DO NOT LOCK OR UNLOCK WITH JUST THE DOOR LOCK SWITCH OPERATION. 
All the doors do not lock or unlock with just the driver's door lock key cylinder key operation C-4 INSPECTION PROCEDURE C-4: CENTRAL DOOR LOCKING SYSTEM: ALL THE DOORS DO NOT LOCK OR UNLOCK WITH JUST THE DOOR LOCK KEY CYLINDER KEY OPERATION. 
Power windows General description concerning the power windows function - GENERAL DESCRIPTION CONCERNING THE POWER WINDOWS 
Power windows do not work at all D-1 INSPECTION PROCEDURE D-1: POWER WINDOWS: POWER WINDOWS DO NOT WORK AT ALL. 
The power window timer function does not work normally D-2 INSPECTION PROCEDURE D-2: POWER WINDOWS: THE POWER WINDOW TIMER FUNCTION DOES NOT WORK NORMALLY 
Only front door window (LH) does not work normally by operating the power window main switch D-3 INSPECTION PROCEDURE D-3: POWER WINDOWS: ONLY FRONT DOOR WINDOW (LH) DOES NOT WORK NORMALLY BY OPERATING THE POWER WINDOW MAIN SWITCH. 
Power windows does not work normally by operating the front passenger's and rear passenger's sub switches D-4 INSPECTION PROCEDURE D-4: POWER WINDOWS: POWER WINDOWS DOES NOT WORK NORMALLY BY OPERATING THE FRONT PASSENGER'S AND REAR PASSENGER'S SUB SWITCHES. 
Front or rear passenger's power windows do not work at all by operating the power window main switch D-5 INSPECTION PROCEDURE D-5: POWER WINDOWS: FRONT OR REAR PASSENGER'S POWER WINDOWS DO NOT WORK AT ALL BY OPERATING THE POWER WINDOW MAIN SWITCH. 
Keyless entry system General description concerning keyless entry system - GENERAL DESCRIPTION CONCERNING THE KEYLESS ENTRY SYSTEM 
Keyless entry system does not operate E-1 INSPECTION PROCEDURE E-1: KEYLESS ENTRY SYSTEM: KEYLESS ENTRY SYSTEM DOES NOT OPERATE. 
The dome light, the turn-signal lights and the horn do not operate through the answerback function E-2 INSPECTION PROCEDURE E-2: KEYLESS ENTRY SYSTEM: THE DOME LIGHT, THE TURN-SIGNAL LIGHTS AND THE HORN DO NOT OPERATE THROUGH THE ANSWERBACK FUNCTION. 
Encrypted code cannot be registered E-3 INSPECTION PROCEDURE E-3: KEYLESS ENTRY SYSTEM: ENCRYPTED CODE CANNOT BE REGISTERED. 
Windshield wiper and washer General description concerning the washer windshield wiper and washer function - GENERAL DESCRIPTION CONCERNING THE WINDSHIELD WIPER AND WASHER 
Windshield wipers does no not work at all F-1 INSPECTION PROCEDURE F-1: WINDSHIELD WIPER AND WASHER: WINDSHIELD WIPERS DOES NO NOT WORK AT ALL. 
The windshield wipers do not work when the windshield wiper switch is at "INT" or "MIST" position or the windshield washer switch is at "ON" position. However, the wipers work at low speed when the windshield wiper switch is at "LO" or "HI" F-2 INSPECTION PROCEDURE F-2: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPERS DO NOT WORK WHEN THE WINDSHIELD WIPER SWITCH IS AT "INT" OR "MIST" POSITION OR THE WINDSHIELD WASHER SWITCH IS AT "ON" POSITION. HOWEVER, THE WIPERS WORK AT LOW SPEED WHEN THE WINDSHIELD WIPER SWITCH IS AT "LO" OR "HI." 
Any of the windshield wiper switch positions is defective F-3 INSPECTION PROCEDURE F-3: WINDSHIELD WIPER AND WASHER: ANY OF THE WINDSHIELD WIPER SWITCH POSITIONS IS DEFECTIVE. 
The windshield wipers does not stop at the predetermined park position F-4 INSPECTION PROCEDURE F-4: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPERS DOES NOT STOP AT THE PREDETERMINED PARK POSITION. 
The windshield intermittent wiper interval is not changed by operating the windshield intermittent wiper interval adjusting knob or according to the vehicle speed F-5 INSPECTION PROCEDURE F-5: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD INTERMITTENT WIPER INTERVAL IS NOT CHANGED BY OPERATING THE WINDSHIELD INTERMITTENT WIPER INTERVAL ADJUSTING KNOB OR ACCORDING TO THE VEHICLE SPEED. 
The windshield intermittent wiper interval is not changed according to the vehicle speed F-6 INSPECTION PROCEDURE F-6: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD INTERMITTENT WIPER INTERVAL IS NOT CHANGED ACCORDING TO THE VEHICLE SPEED. 
Windshield washer does not work F-7 INSPECTION PROCEDURE F-7: WINDSHIELD WIPER AND WASHER: WINDSHIELD WASHER DOES NOT WORK. 
Rear wiper and washer General description concerning the rear wiper and washer function - GENERAL DESCRIPTION CONCERNING THE REAR WIPER AND WASHER 
Rear wiper does not work at all G-1 INSPECTION PROCEDURE G-1: REAR WIPER AND WASHER: REAR WIPER DOES NOT WORK AT ALL. 
Rear wiper does not stop at the predetermined park position G-2 INSPECTION PROCEDURE G-2: REAR WIPER AND WASHER: REAR WIPER DOES NOT STOP AT THE PREDETERMINED PARK POSITION. 
When the selector lever is moved to "R" position during the rear wiper operation, the rear wiper does not operate at the continuous mode G-3 INSPECTION PROCEDURE G-3: REAR WIPER AND WASHER: WHEN THE SELECTOR LEVER IS MOVED TO "R" POSITION DURING THE REAR WIPER OPERATION, THE REAR WIPER DOES NOT OPERATE AT THE CONTINUOUS MODE. 
Rear washer does not operate G-4 INSPECTION PROCEDURE G-4: REAR WIPER AND WASHER: REAR WASHER DOES NOT OPERATE. 
Seat belt warning light General description concerning the seat belt warning light function - GENERAL DESCRIPTION CONCERNING THE SEAT BELT WARNING LIGHT 
The seat belt warning light does not work normally H-1 INSPECTION PROCEDURE H-1: SEAT BELT WARNING LIGHT: THE SEAT BELT WARNING LIGHT DOES NOT WORK NORMALLY. 
Headlight and taillight General description concerning headlight and taillight function - GENERAL DESCRIPTION CONCERNING THE HEADLIGHT AND TAILLIGHT 
Taillights does not illuminate normally I-1 INSPECTION PROCEDURE I-1: HEADLIGHT AND TAILLIGHT: TAILLIGHTS DOES NOT ILLUMINATE NORMALLY. 
Headlights (low-beam) do not illuminate normally I-2 INSPECTION PROCEDURE I-2: HEADLIGHT AND TAILLIGHT: HEADLIGHTS (LOW-BEAM) DO NOT ILLUMINATE NORMALLY. 
Headlights (high-beam) do not illuminate normally I-3 INSPECTION PROCEDURE I-3: HEADLIGHT AND TAILLIGHT: HEADLIGHTS (HIGH-BEAM) DO NOT ILLUMINATE NORMALLY. 
When the passing switch is turned "on", the headlights (low-beam or high-beam) do not illuminate I-4 INSPECTION PROCEDURE I-4: HEADLIGHT AND TAILLIGHT: WHEN THE PASSING SWITCH IS TURNED "ON", THE HEADLIGHTS (LOW-BEAM OR HIGH-BEAM) DO NOT ILLUMINATE. 
Headlights do not illuminate when the lighting switch is at "AUTO," "TAIL," and "PASSING" position, but illuminate at low-beam when the switch is at "head" position, at this position, the headlights cannot be changed into high beam by operating the dimmer switch I-5 INSPECTION PROCEDURE I-5: HEADLIGHT AND TAILLIGHT: HEADLIGHTS DO NOT ILLUMINATE WHEN THE LIGHTING SWITCH IS AT "AUTO," "TAIL," AND "PASSING" POSITION, BUT ILLUMINATE AT LOW-BEAM WHEN THE SWITCH IS AT "HEAD" POSITION, AT THIS POSITION, THE HEADLIGHTS CANNOT BE CHANGED INTO HIGH BEAM BY OPERATING THE DIMMER SWITCH. 
Any of taillights, the position lights, the side marker lights or the license plate lights do not illuminate I-6 INSPECTION PROCEDURE I-6: HEADLIGHT AND TAILLIGHT: ANY OF TAILLIGHTS, THE POSITION LIGHTS, THE SIDE MARKER LIGHTS OR THE LICENSE PLATE LIGHTS DO NOT ILLUMINATE. 
One of the headlights does not illuminate I-7 INSPECTION PROCEDURE 1-7: HEADLIGHT AND TAILLIGHT: ONE OF THE HEADLIGHTS DOES NOT ILLUMINATE. 
The high-beam indicator light does not illuminate I-8 INSPECTION PROCEDURE 1-8: HEADLIGHT AND TAILLIGHT: THE HIGH-BEAM INDICATOR LIGHT DOES NOT ILLUMINATE. 
Headlight automatic shutdown function does not work normally I-9 INSPECTION PROCEDURE I-9: HEADLIGHT AND TAILLIGHT: HEADLIGHT AUTOMATIC SHUTDOWN FUNCTION DOES NOT WORK NORMALLY. 
Headlight dimmer switch automatic resetting function does not work normally I-10 INSPECTION PROCEDURE I-10: HEADLIGHT AND TAILLIGHT: HEADLIGHT DIMMER SWITCH AUTOMATIC RESETTING FUNCTION DOES NOT WORK NORMALLY. 
Daytime running light function does not work normally. < vehicles for CANADA> I-11 INSPECTION PROCEDURE I-11: HEADLIGHT AND TAILLIGHT: DAYTIME RUNNING LIGHT FUNCTION DOES NOT WORK NORMALLY. < VEHICLES WITH DAYTIME RUNNING LIGHT FUNCTION> 
Fog lights General description concerning fog light - GENERAL DESCRIPTION CONCERNING FOG LIGHT 
Fog lights do not illuminate when the fog light switch is turned on INSPECTION PROCEDURE J-1: FOG LIGHT: FOG LIGHTS DO NOT ILLUMINATE WHEN THE FOG LIGHT SWITCH IS TURNED ON.   
Fog lights do not go out when the headlights (low-beam) are turned off while the fog lights are on J-2 INSPECTION PROCEDURE J-2: FOG LIGHT: FOG LIGHTS DO NOT GO OUT WHEN THE HEADLIGHTS (LOW-BEAM) ARE TURNED OFF WHILE THE FOG LIGHTS ARE ON. 
One of the fog lights does not illuminate J-3 INSPECTION PROCEDURE J-3: FOG LIGHT: ONE OF THE FOG LIGHTS DOES NOT ILLUMINATE. 
Flasher timer General description concerning the flasher timer function - GENERAL DESCRIPTION CONCERNING THE FLASHER TIMER 
Turn-signal lights does not flash when the turn-signal light switch is turned on K-1 INSPECTION PROCEDURE K-1: FLASHER TIMER: TURN-SIGNAL LIGHTS DOES NOT FLASH WHEN THE TURN-SIGNAL LIGHT SWITCH IS TURNED ON. 
Hazard warning lights do not flash when the hazard warning light switch is turned on K-2 INSPECTION PROCEDURE K-2: FLASHER TIMER: HAZARD WARNING LIGHTS DO NOT FLASH WHEN THE HAZARD WARNING LIGHT SWITCH IS TURNED ON. 
The right or left turn-signal light does not illuminate K-3 INSPECTION PROCEDURE K-3: FLASHER TIMER: THE RIGHT OR LEFT TURN-SIGNAL LIGHT DOES NOT ILLUMINATE. 
Interior light General description concerning the interior light function - GENERAL DESCRIPTION CONCERNING THE INTERIOR LIGHT 
The dome light and luggage dome light do not illuminate or go out normally L-1 INSPECTION PROCEDURE L-1: INTERIOR LIGHT: THE DOME LIGHT AND LUGGAGE AREA LIGHT DO NOT ILLUMINATE OR GO OUT NORMALLY. 
The dome light or luggage dome light does not illuminate or go out normally L-2 INSPECTION PROCEDURE L-2: INTERIOR LIGHT: THE DOME LIGHT OR LUGGAGE AREA LIGHT DOES NOT ILLUMINATE OR GO OUT NORMALLY. 
Dome light and luggage dome light dimming function does not work normally L-3 INSPECTION PROCEDURE L-3: INTERIOR LIGHT: DOME LIGHT AND LUGGAGE AREA LIGHT DIMMING FUNCTION DOES NOT WORK NORMALLY. 
The interior light automatic shut-down function does not work normally L-4 INSPECTION PROCEDURE L-4: INTERIOR LIGHT: THE INTERIOR LIGHT AUTOMATIC SHUT-DOWN FUNCTION DOES NOT WORK NORMALLY. 
The door ajar indicator lights do not illuminate or go out normally L-5 INSPECTION PROCEDURE L-5: INTERIOR LIGHT: THE DOOR AJAR INDICATOR LIGHTS DO NOT ILLUMINATE OR GO OUT NORMALLY. 
scientia non olet · About Mike's Workshop Manuals