Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Simplified Wiring System (SWS)) >> On-Vehicle Service >> Entry Conditions For Adjustment Mode

Entry Conditions For Adjustment Mode

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set switches to the following conditions:
    • Hazard warning light switch: OFF
    • Diagnosis control: ON (Connect scan tool MB991958 to the data link connector, or connect the data link connector terminal 1 to ground).
    • Key reminder switch: OFF (insert the ignition key)
    • Ignition switch: "LOCK" (OFF)
    • Driver's door switch: OFF (driver's door close)
  2. If the windshield washer switch remains on for 10 seconds or more, the tone alarm incorporated in the ETACS-ECU sounds once, and then enter the adjustment mode.
scientia non olet · About Mike's Workshop Manuals