< 2.4L Engine>
WARNING: This page is about a different car, the 2004 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications (2.4L Engine)
| ITEM | SPECIFICATION |
|---|---|
| Charging system | |
| Connector bracket bolt | 11 ± 1 N.m (98 ± 8 in-lb) |
| Generator bolt | 49 ± 9 N.m (36 ± 7 ft-lb) |
| Generator mounting bracket bolt | 49 ± 9 N.m (36 ± 7 ft-lb) |
| Generator nut | 44 ± 10 N.m (33 ± 7 ft-lb) |
| Generator terminal nut | 12 ± 2 N.m (102 ± 22 in-lb) |
| Harness bracket bolt | 14 ± 1 N.m (120 ± 13 in-lb) |
| Ignition system | |
| Camshaft position sensor bolt | 11 ± 1 N.m (98 ± 8 in-lb) |
| Crankshaft position sensor bolt | 8.5 ± 0.5 N.m (76 ± 4 in-lb) |
| Ignition coil bolt | 10 ± 2 N.m (89 ± 17 in-lb) |
| Intake manifold stay bolt | 31 ± 3 N.m (23 ± 2 ft-lb) |
| Knock sensor | 23 ± 2 N.m (17 ± 1 ft-lb) |
| Knock sensor connector bracket bolt | 11 ± 1 N.m (98 ± 8 in-lb) |
| Spark plug | 25 ± 4 N.m (18 ± 3 ft-lb) |
| Starting system | |
| ATF warmer (transmission fluid cooler) bracket bolt | 23 ± 3 N.m (17 ± 2 ft-lb) |
| Starter bolt | 30 ± 3 N.m (23 ± 2 ft-lb) |
| Starter cover bolt | 9.0 ± 2.0 N.m (80 ± 17 in-lb) |
| Starter cover bracket bolt | 49 ± 9 N.m (36 ± 7 ft-lb) |
| Starter terminal nut | 12 ± 2 N.m (102 ± 22 in-lb) |