Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Manual Transaxle Overhaul) >> Transaxle >> Disassembly And Assembly >> Assembly Service Points >> >>M<< Select Lever Installation

>>M<< Select Lever Installation

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease (Mitsubishi Genuine Part number 0101011 or equivalent) to the control shaft sliding portion of the select lever shoe.
  2. Install the select lever and tighten the bolts to specified torque.

    Tightening torque: 19 plus/minus 3 N-m (14 plus/minus 2 ft-lb)

    Fig 1: Applying Grease To Control Shaft Sliding Portion Of Select Lever Shoe
    G03305643Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals