Fastener Tightening Specification
WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specification Table
| ITEMS | SPECIFICATIONS |
|---|---|
| Roll stopper bracket mounting bolt | 69 ± 10 N.m (51 ± 7 ft-lb) |
| Shift cable bracket mounting bolt | 19 ± 3 N.m (14 ± 2 ft-lb) |
| Select lever mounting bolt | 19 ± 3 N.m (14 ± 2 ft-lb) |
| Speedometer gear mounting bolt | 4 ± 1 N.m (35 ± 9 in-lb) |
| Backup light switch | 32 ± 2 N.m (24 ± 1 ft-lb) |
| Interlock plate bolt | 30 ± 3 N.m (22 ± 2 ft-lb) |
| Poppet spring | 32 ± 2 N.m (24 ± 1 ft-lb) |
| Control housing mounting bolt | 19 ± 3 N.m (14 ± 2 ft-lb) |
| Under cover mounting bolt | 7 ± 1 N.m (61 ± 9 in-lb) |
| Reverse idler gear shaft mounting bolt | 48 ± 6 N.m (35 ± 4 ft-lb) |
| Clutch housing-transaxle case mounting bolt | 44 ± 5 N.m (33 ± 4 ft-lb) |
| Front bearing retainer mounting bolt <F5M42> | 19 ± 3 N.m (14 ± 2 ft-lb) |
| Select lever mounting nut | 12 ± 1 N.m (104 ± 9 in-lb) |
| Stopper bracket mounting bolt | 25 ± 3 N.m (19 ± 2 ft-lb) |
| Clutch release bearing retainer mounting bolt | 9.8 ± 2 N.m (87 ± 17 in-lb) |
| Differential drive gear mounting bolt | 132 ± 5 N.m (98 ± 4 ft-lb) |