How To Read Data List

WARNING: This page is about a different variant/trim than selected.

Required Special Tools:

MB991958: Scan Tool (MUT-III Sub Assembly)
- MB991824: V.C.I.
- MB991827: MUT-III USB Cable
- MB991911: MUT-III Main Harness B

CAUTION: To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991958.

Fig 1: Connecting Scan Tool To Data Link Connector For Reading Data List

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Connect scan tool MB991958 to the data link connector.
Turn the ignition switch to the "ON" position.
Select "Interactive Diagnosis" from the start-up screen.
Select "System select."
Choose "ELC-A/T" from the "POWER TRAIN" tab.
Select "MITSUBISHI."
Select "Data List."
Choose an appropriate item and select the "OK" button.