Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2003 >> Outlander LS, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> On-Vehicle Service >> How To Replace The Transmitter Battery

How To Replace The Transmitter Battery

CAUTION: Do not allow water or dust to enter the inside of the transmitter when it is open. Also, do not touch the precision electronic device.
  1. Remove the set screw to remove the battery from the transmitter.
    Fig 1: Removing Battery From Transmitter
    G01862906Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Install a battery with its (+) side face-down.
    1. Battery required for replacement: Coin type battery CR2032 
  3. Insert the claw first, and assemble the transmitter.
  4. Verify that the keyless entry system operates.
scientia non olet · About Mike's Workshop Manuals