Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2002 >> Eclipse RS, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Overhaul >> Disassembly And Assembly >> Input Shaft >> Assembly Service Points >> >>E<< Synchronizer Ring Installation

>>E<< Synchronizer Ring Installation

CAUTION: There are 3rd speed and 4th speed synchronizer rings, if the wrong one is installed it will effect the shift feeling.
  1. Ascertain whether or not there are identification notches on the synchronizer ring.
    1. Two notches: 3rd speed synchronizer ring 
    2. No notches: 4th speed synchronizer ring 
    Fig 1: Identifying Notches Location
    G01107114Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Install the synchronizer ring so that it does not angle to the cone of the gear.
scientia non olet · About Mike's Workshop Manuals