Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2001 >> Mirage ES, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Trouble Shooting >> Cruise Control Switch Function Test

Cruise Control Switch Function Test

NOTE: If vehicle speed decreases about 9 MPH below set speed, set speed will be cancelled. Speed will not set beyond cruise control system speed limit of 124 MPH.
  1. Cruise control switch is mounted on steering column. To operate cruise control system, depress end of stalk to turn cruise control to ON position. Ensure CRUISE indicator light in instrument cluster comes on.
  2. Drive vehicle to about 25 MPH or greater. Move cruise control lever down to activate COAST/SET position. Vehicle speed should stay at set speed. To increase set speed, move lever up to activate ACC/RES mode and hold until new set speed is reached.
  3. To lower set speed, move lever down to activate COAST/SET position and hold until new set speed is reached. To return to set speed after cancellation, move switch up to ACC/RES position. Vehicle speed should return to previous setting before cancellation. Set speed should cancel when any of the following occurs:
    • Brake pedal is depressed.
    • Clutch pedal is depressed.
    • Cruise control CANCEL switch is activated.
    • Cruise control switch is turned to OFF position.
    • Ignition switch is turned to OFF position.
    • Transmission is shifted to Neutral.
scientia non olet · About Mike's Workshop Manuals