Ignition Coil Test
WARNING: This page is about a different car, the 2000 Acura Integra, 2000 Acura 3.5RL, and 2000 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Measure primary winding resistance between ignition coil connector terminals No. 1 and 2. See Fig 1. Resistance should be .9-1.1 ohms at 77°F (25°C). Replace coil if resistance is not within specification. Resistance specification for secondary winding is not available.