Removal & Installation
WARNING: This page is about a different car, the 2001 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
- Air bag module is mounted on face of steering wheel. Ensure wheels are facing straight ahead and steering wheel is locked. Remove air bag module-to-steering wheel nuts from back side of steering wheel.
- Lift air bag module. Disconnect electrical connector from air bag module by pressing air bag connector lock toward outside to spread it open. Pry upward gently to remove connector. DO NOT apply excessive force. Remove air bag module.
- To install, reverse removal procedure. Ensure wiring is properly positioned. Tighten air bag module-to-steering wheel nuts. Check SRS warning light to ensure system is functioning properly. See AIR BAG RESTRAINT SYSTEMS article.