Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2000 >> Eclipse RS, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock/Traction Control >> Trouble Shooting >> Ignition Switch In On Position, Warning Light Remains On

Ignition Switch In On Position, Warning Light Remains On

  1. Disconnect ABS ECU harness connector A-02. If warning light illuminates, go to next step. If ABS warning light does not illuminate, replace ABS ECU and go to step  3 .
  2. Inspect Light Green/Black wire and connectors between terminal No. 21 at ABS ECU harness connector A-02 and terminal No. 24 at instrument cluster (ABS warning light) connector C-42. Repair any damage found and go to next step.
  3. Confirm ABS warning light turns off 3 seconds after ignition switch is turned to RUN position.
scientia non olet · About Mike's Workshop Manuals