Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 1992 >> Mirage VL, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - Tests W/Codes) >> Self-Diagnostic System >> Retrieving Codes (Using DRB-II) >> Notes

Retrieving Codes (Using DRB-II): Notes

WARNING: This page is about a different car, the 1992 Plymouth Colt, 1992 Eagle Summit, and 1992 Dodge Colt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before entering on-board diagnostics, see PRE-TEST INSPECTION  . Turn ignition off. Locate self-diagnostic connector, which is next to fuse block. Using appropriate Mitsubishi cartridge and adapter, connect DRB-II to diagnostic connector.
  2. Ensure all accessories are off. Turn ignition on. All character positions will illuminate and copyright information will appear on screen for a few seconds.
  3. If DRB-II screen displays an error message, see DRB-II ERROR SCREENS. DRB-II will offer 4 menus: VEHICLES TESTED, HOW TO USE, CONFIGURE and SELECT VEHICLE.
scientia non olet · About Mike's Workshop Manuals