Alignment Procedure For Clock Spring Neutral Point - Service Manual Revision (TSB-08-52B-002)

WARNING: This page is about the Starion LE, Automatic, which is a different variant/trim than selected.

Publication date: 2008-03-01
Reference number: TSB-08-52B-002

ALIGNMENT PROCEDURE FOR CLOCK SPRING NEUTRAL POINT - SERVICE MANUAL REVISION

Technical Service Bulletin

Reference Number(s): TSB-08-52B-002, Date of Issue: March, 2008

MITSUBISHI:

All (exc. Montero Sport & Raider)

PURPOSE

A modified clock spring has been adopted for Service Parts on affected vehicles as of September 2007. New and old style parts are interchangeable. This TSB advises the procedures for alignment of the neutral point of the new clock spring when a part is replaced.

AFFECTED VEHICLES

All (exc. Montero Sport & Raider)

REFERENCE INFORMATION

Fig 1: Identifying Clock Spring Neutral Position

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Clock Spring Mating Marks (Attachment 1)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.