Front Wheel Alignment Check And Adjustment: Caster
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Standard value: 4° 25' ± 0° 30' (Left/right deviation within 30')
Kingpin inclination 13° 50' ± 1° 30'
NOTE:
Camber and caster are preset at the factory and cannot be adjusted.
CAUTION:
Do not apply the vehicle weight to the wheel bearing with the driveshaft nut loosened.
NOTE:
Tighten the wheel alignment gauge attachment (special tool: MB991004) to the specified torque, then perform measurement.
Tightening torque: 144 - 176 N.m (107 - 129 ft-lb)