Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 1987 >> Starion ESI-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Ignition System - Lancer Evolution) >> Ignition System >> On-Vehicle Service >> Spark Plug Check And Cleaning >> Spark Plug Gap Check

Spark Plug Gap Check

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Check the plug gap with the wire type plug gauge. Replace it if the limit is exceeded.

Standard value: 0.5 - 0.6 mm (0.020 - 0.023 inch) 

Limit: 0.75 mm (0.029 inch) 

Fig 1: Checking Plug Gap With Wire Type Plug Gauge
G05393756Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals