Maintenance And General Information -- Repair (F57) — 2023 Mini Cooper Base, 2D Convertible, Standard Trans Service Manual ~ Mike's Workshop Manuals

Brake lines and connections: visual inspection for leaks, damage, attachment and correct position
Care measures for vehicles in stock (new and used vehicles) as well as vehicles to be decommissioned in customer hands
Information for handling the service information: repair instructions, technical data, Tightening torques
CBS reset
Check horn, headlight flashers and hazard warning flashers
Checking coolant level and concentration, correcting if necessary
Checking for traffic safety (test drive)
Checking instrument/inscription lighting, interior/trunk/glove box lights and blower
Checking lighting system
Check windshield wash/wipe system
Safety belts: Check condition of seat belt strap, check function of electrically motorized reel, seat belt locking reel, seat belt buckle, seat belt clip and, if necessary, seat belt clasp
Steering components: Check for play, damage and, if necessary, tightness
Tires: checking and if necessary correcting inflation pressure, checking condition, tread depth and pattern
Check vehicle underbody for damage, correct position, tightness, corrosion
When driving on a race track
Windshield washer system: checking fluid level, topping up if necessary
Work instruction for removing the protective film
00 00 009 Free pre-delivery check
- Reset transport mode and perform pre-delivery check with diagnostic system
- Checking Check Control messages
- Check that navigation map is up-to-date and valid in the relevant country
- Checking pre-delivery check entry in service history
- Checking the tire settings in the CID (only in versions with a Tire Pressure Monitor SA2VB)
- Checking tire pressure (only while using Tire Pressure Monitor SA2VB)
- Checking the tire pressure and resetting the Tire Pressure Monitor
- For winter tires: Attach the label for top speed
- Checking implementation of country-specific requirement for BMW Roadside Assistance
- Top off the washer fluid for the washer system
- Enclosing documents
- Installing accessory items
- Checking all vehicle keys for proper operation, activating Key Card and placing in vehicle
00 00 009 pre-delivery check
00 00 105 Standard scope of service
00 00 255 MINI engine oil service
- Removing the oil filler cap
- Removing the front underbody protection
- Draining the motor oil
- Remove oil filter
- Install the oil filter
- Install front underbody protection
- Topping up the motor oil
- Installing the oil filler cap
00 00 602 Service air filter insert
00 00 602 Service - air filter insert
- Remove air filter insert
- Installing the air filter insert
00 00 610 Engine oil service
- Removing the oil filler cap
- Removing the front underbody protection
- Draining the motor oil
- Remove oil filter
- Install the oil filter
- Install front underbody protection
- Topping up the motor oil
- Installing the oil filler cap
- Perform the CBS reset
- Replace battery of the remote control key(s)
00 00 610 Service motor oil (US version only)
00 00 612 Service - front brakes
00 00 614 Service - rear brakes
00 00 616 Service - cabin air filter
00 00 618 Service - brake fluid
00 00 622 Spark plugs service
- Overview
- Removing all spark plugs
- Installing all spark plugs
00 00 624 Vehicle check service
00 00 687 0Checking gas pressure springs for hood
- Checking the expiry of the gas pressure springs for hood and, if necessary, replacing them
00 00 741 Suspension block pre-delivery check
- Removing the spring blocker
00 00 742 Pre-delivery check of service and parking brakes with transport and immobilization periods of 3-6 weeks
- Checking the service and parking brake for function
00 00 744 Pre-delivery check, service brake and electromechanical parking brake for transport and immobilization periods over 6 weeks
- Bedding in (brake) the service and electromechanical parking brake

00 11 Transmission Oil