Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mini >> 2016 >> Cooper Paceman Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Functional Description (R60 Cooper Countryman)) >> Stability Control System - Functional Description >> Dynamic Stability Control with four-wheel drive >> System functions >> Notes

System functions: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 MINI Cooper Countryman, 2015 MINI Cooper Countryman, 2014 MINI Cooper Countryman, 2013 MINI Cooper, and 2012 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

The following illustrations show the functional networking.

Fig 1: Dynamic Stability Control Communication Diagram
G11018232Courtesy of BMW OF NORTH AMERICA, INC.
Item Explanation
1 Front left wheel speed sensor
2 Brake pad wear sensor, front left
3 Brake fluid level switch
4 Dynamic stability control (DSC)
5 DME (Digital Engine Electronics)
6 Front right wheel speed sensor
7 Junction Box Electronics (JBE)
8 Front fuse and relay module
9 Rear right wheel speed sensor
10 Brake pad wear sensor, rear right
11 DSC sensor
12 4WD coupling
13 Rear left wheel speed sensor
14 DTC button (in center console control panel)
15 Integrated automatic heating and air conditioning (IHKA) or integrated heating and air-conditioning control (IHKS)
16 Steering column switch center (SZL)
17 Auxiliary instrument (KOMBI2)
18 Brake light switch
19 Instrument panel (KOMBI)
20 Car access system (CAS)
21 Power distribution box, engine compartment
22 Brake fluid level switch

The following system functions are described for the DSC:

The following additional functions that do not belong to driving dynamics control are integrated: