Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mini >> 2016 >> Cooper Paceman Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Functional Description (R60 Cooper Countryman)) >> Stability Control System - Functional Description >> Dynamic Stability Control with four-wheel drive >> System functions >> Drive-off assistant

Drive-off assistant

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 MINI Cooper Countryman, 2015 MINI Cooper Countryman, 2014 MINI Cooper Countryman, 2013 MINI Cooper, and 2012 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

When driving off on an incline, a change from the brake pedal to the accelerator pedal is required. Here, the drive-off assistant prevents the vehicle from rolling in the following situations:

Here, the brake pressure required to stop the vehicle is maintained. The gradient angle of the road surface is monitored by the longitudinal acceleration sensor in the DSC. The necessary braking torque or engine torque is calculated from the gradient. After detection of the wish to drive off, the brake pressure is reduced as soon as the applied engine torque is sufficient to move the vehicle in the desired direction of travel. If the parking brake is operated, the drive-off assistant is disabled. If there is no wish to drive off within approx. 2 seconds after releasing the brake pedal, the drive-off assistant is also disabled.