Regular sleeping
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 MINI Cooper Countryman, 2015 MINI Cooper Countryman, 2014 MINI Cooper Countryman, 2013 MINI Cooper, and 2012 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
This service information provides an overview of the typical current values that are measured in an external closed-circuit current measurement with a current measuring clip during regular sleeping.
Refer to the following service information for the procedure for external standby current measurement: Observing going into sleep mode by means of external standby current measurement
| No. | Time | Event | Typical current values |
|---|---|---|---|
| 1 | 0 - 3 min | Reaching the idle state | 6 to 15 A depending on the equipment. |
| 3 - 8 min | Vehicle sleeping | 0.4 to 1.5 A depending on the consumer units that are switched on (e.g. map-reading light or glove box light). | |
| 2 | 8 - 9 min | FRM wakes up the vehicle: Consumer unit shutdown. | 6 to 8 A depending on the equipment. |
| 9 - 30 min | Vehicle sleeping | - 250 to 350 mA depending on equipment.- approx. 350 mA as of model year 09/2007 for vehicles Automatic Start/Stop and DC/DC converter. | |
| 3 | 30 min | Shutdown of terminal 30 switched | < 20 mA depending on the equipment. |