2. Programming (random code hand-held transmitter)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 MINI Cooper Countryman, 2015 MINI Cooper Countryman, 2014 MINI Cooper Countryman, 2013 MINI Cooper, and 2012 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
To program the integrated universal remote control, use the operating manual of the equipment to be set.
Obtain information there regarding the possibility for synchronization. When programming a random code hand-held transmitter, comply with the following additional instructions:
- Park the vehicle within range of the radio-remote-controlled facility
- Program the integrated universal remote control as described previously at 'fixed-code hand-held transmitters'.
- Find the button on the receiver of the equipment to be set, e.g. on the drive.
- Press the button on the receiver of the equipment to be set. After Step 4, approx. 30 seconds remain for Step 5.
- Press the programmed memory button of the integrated universal remote control three times.
The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter.