Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mini >> 2014 >> Cooper Base, 2D Hatchback, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Body - Repair -- F55) >> Body, General >> 41 00... Gap dimensions, body

41 00... Gap dimensions, body

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The dimensions specified in this service information are applicable at an object temperature of 20 °C. The aim of adjustment is to achieve a uniform gap.

Symmetry of the gaps between left and right sides of the vehicle has top priority.

For door gaps, the maximum deviation between the front and rear door gaps must be 1.0 mm.

Adjust headlight and tail light with constant all-round gap (visually).

No gap dimension are specified for components which cannot be adjusted.

Dimensions in mm 

Fig 1: Vehicle Body Gap Dimensions (Front)
G11787877Courtesy of BMW OF NORTH AMERICA, INC.

"+" dimensions are a glass sunroof protrusion.

"-" dimensions are a glass sunroof recessed.

Fig 2: Vehicle Body Gap Dimensions (Sunroof)
G11787878Courtesy of BMW OF NORTH AMERICA, INC.
Fig 3: Vehicle Body Gap Dimensions (Side)
G11787879Courtesy of BMW OF NORTH AMERICA, INC.
Fig 4: Vehicle Body Gap Dimensions (Rear-Side)
G11787880Courtesy of BMW OF NORTH AMERICA, INC.
Fig 5: Vehicle Body Gap Dimensions (Rear)
G11787881Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals