61 13... Crimping Micro Power Quadlock contacts (MPQ)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
To crimp MPQ contacts, use pliers 61 4 321 (1) in conjunction with crimping head 61 4 325 (2) from crimping set 61 4 320 .
NOTE:
Pliers (1) open automatically as far as they will go when handles are pressed together.
Open pliers (1).
NOTE:
Place contact (2) with utmost care in designated nest (observe cable cross-section) in crimping head (3). Make sure it is exactly positioned.
Place MPQ contact (2) in crimping head (3).
Close pliers (1) one notch.
NOTE:
Follow procedure for CUTTING AND STRIPPING INSULATION from cables.
Insert stripped cable (2).
Close pliers (1) fully.
Open pliers (1) and remove cable (2).