Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mini >> 2014 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2758 (General Electrical System - Repair - F01/F02) >> Plug Connection, Terminal, Fuse Box >> 61 13... Opening contacts and locks of different plug contact systems >> 61 13... Circular connector, 20-pin, system D2.5

61 13... Circular connector, 20-pin, system D2.5

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Carefully press back retaining lugs (1) of internal connector (2).

Fig 1: Identifying Retaining Lugs And Internal Connector
G00425951Courtesy of BMW OF NORTH AMERICA, INC.

Turn internal connector (2) until retaining lugs (1) snap into release groove (3).

Fig 2: Identifying Retaining Lugs And Locking Groove
G00425952Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 , press down retaining hook (4) of corresponding contact and pull out cable.

Fig 3: Identifying Arrester Hook And Special Tool 61 1 132
G00425953Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals